esphome:
  name: 3d-printer-control
  platform: ESP32
  board: esp32cam

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:
  password: "a540327cb63deda6aa4ddfedfe42df83"

wifi:
  ssid: "EasyBox-368239"
  password: "inginf95"

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "3D-Printer-Control"
    password: "YUnLlGxWjXgs"


#currently not used:
binary_sensor:
  - platform: gpio
    pin: 
      number: GPIO02
      mode: INPUT_PULLUP
      inverted: true
    name: "3D-Printer-Button"    
    
captive_portal:

#switches for LED and SWPower
switch:
  - platform: gpio
    name: "3D-Printer-LED"
    pin: GPIO04
  - platform: gpio
    name: "3D-PCPower"
    pin: GPIO14
    
sensor:
  - platform: wifi_signal
    name: "3D-Printer-WiFiSignal"
    update_interval: 60s
  - platform: uptime
    name: "3D-Printer-Uptime"

#Camera settings, maybe increase resolution in future   
esp32_camera:
  external_clock:
    pin: GPIO0
    frequency: 20MHz
  i2c_pins:
    sda: GPIO26
    scl: GPIO27
  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
  vsync_pin: GPIO25
  href_pin: GPIO23
  pixel_clock_pin: GPIO22
  power_down_pin: GPIO32

  # Image settings
  name: "3d-Printer-Camera"