esphome:
  name: sonoff-arduino-bridge
  platform: ESP8266
  board: esp01_1m
  board_flash_mode: dout
  includes:
    - uart_read_line_sensor.h
    
mqtt:
  broker: 192.168.178.36
  port: 1884
  username: nils
  password: inginf95
  on_message:
    - topic: sonoff-arduino-bridge/cmnd
      qos: 0
      then:
        - uart.write: !lambda |-
            std::vector<unsigned char> data(x.begin(), x.end());
            return data;
    - topic: sonoff-arduino-bridge/pc-on
      qos: 0
      then:
        - uart.write: "OPTO1=ON\r"
        - delay: 2s
        - uart.write: "OPTO1=OFF\r"
    - topic: sonoff-arduino-bridge/pc-off
      qos: 0
      then:
        - uart.write: "OPTO1=ON\n"
        - delay: 5s
        - uart.write: "OPTO1=OFF\n"
  
# Enable logging
logger:
  baud_rate: 0
  
# Enable Home Assistant API
#api:

web_server:
  port: 80
  auth:
    username: nils
    password: inginf95

uart:
  tx_pin: GPIO01
  rx_pin: GPIO03
  baud_rate: 9600
  id: uart_bus
  
ota:
  password: "0848c056d780accd7fbb0dbaf989156b"

wifi:
  ssid: "EasyBox-368239"
  password: "inginf95"

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Sonoff-Basic-Test"
    password: "Wky9j6BNCgI0"

captive_portal:

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO0
      mode: INPUT_PULLUP
      inverted: True
    name: "Sonoff Basic Button"
    on_press:
      - switch.toggle: fakebutton

switch:
  - platform: template
    name: "Sonoff Basic Relay"
    optimistic: true
    id: fakebutton
    turn_on_action:
    - switch.turn_on: relay
    - light.turn_on: led
    turn_off_action:
    - switch.turn_off: relay
    - light.turn_off: led
  - platform: gpio
    id: relay
    pin: GPIO12

output:
  - platform: esp8266_pwm
    id: basic_green_led
    pin:
      number: GPIO13
      inverted: True

light:
  - platform: monochromatic
    name: "Sonoff Basic Green LED"
    output: basic_green_led
    id: led

sensor:
  - platform: wifi_signal
    name: "Sonoff Basic WiFi Signal"
    update_interval: 60s
  - platform: uptime
    name: "Sonoff Basic Uptime"
  
    
text_sensor:
  - platform: version
    name: "Sonoff Basic ESPHome Version"
  - platform: mqtt_subscribe
    name: "UART Tx"
    id: command
    topic: sonoff-arduino-bridge/cmnd
  - platform: custom
    lambda: |-
        auto my_custom_sensor = new UartReadLineSensor(id(uart_bus));
        App.register_component(my_custom_sensor);
        return {my_custom_sensor};
    text_sensors:
      id: "uart_readline"
      name: "UART Rx"