esphome:
  name: hs_oben
  platform: ESP32
  board: esp32dev

# Enable logging
logger:

# Enable Home Assistant API
#api:

ota:
  password: "dd9d2a5e573d1d0ed1435d5c176b580c"

wifi:
  ssid: "EasyBox-368239"
  password: "inginf95"

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "HS-Obergeschoss Fallback Hotspot"
    password: "inginf95"

switch:
  - platform: gpio
    name: "Ventil 1"
    id: vent1
    pin: GPIO32
    inverted: true
  - platform: gpio
    name: "Ventil 2"
    id: vent2
    pin: GPIO33
    inverted: true
  - platform: gpio
    name: "Ventil 3"
    id: vent3
    pin: GPIO25
    inverted: true
  - platform: gpio
    name: "Ventil 4"
    id: vent4
    pin: GPIO26
    inverted: true


mqtt:
  broker: 192.168.178.36
  port: 1884
  username: nils
  password: inginf95
  # Reaction to target temperature
  on_message:
    - topic: stat/HSObergeschoss/HK1/temperature
      then:
        - if:
            condition:
              lambda: 'return (esphome::parse_number<float>(x)) < (id(TargetHK1).state);'
            then:
              - logger.log: "Turn on vent 1!"
              - switch.turn_on: vent1
              - mqtt.publish:
                  topic: stat/HSObergeschoss/HK1/status
                  payload: "ON"
            else:
              - logger.log: "Turn off vent 1!"
              - switch.turn_off: vent1
              - mqtt.publish:
                  topic: stat/HSObergeschoss/HK1/status
                  payload: "OFF"
    - topic: stat/HSObergeschoss/HK2/temperature
      then:
        - if:
            condition:
              lambda: 'return (esphome::parse_number<float>(x)) < (id(TargetHK2).state);'
            then:
              - logger.log: "Turn on vent 2!"
              - switch.turn_on: vent2
              - mqtt.publish:
                  topic: stat/HSObergeschoss/HK2/status
                  payload: "ON"
            else:
              - logger.log: "Turn off vent 2!"
              - switch.turn_off: vent2    
              - mqtt.publish:
                  topic: stat/HSObergeschoss/HK2/status
                  payload: "OFF"
    - topic: stat/HSObergeschoss/HK3/temperature
      then:
        - if:
            condition:
              lambda: 'return (esphome::parse_number<float>(x)) < (id(TargetHK3).state);'
            then:
              - logger.log: "Turn on vent 3!"
              - switch.turn_on: vent3
              - mqtt.publish:
                  topic: stat/HSObergeschoss/HK3/status
                  payload: "ON"
            else:
              - logger.log: "Turn off vent 3!"
              - switch.turn_off: vent3
              - mqtt.publish:
                  topic: stat/HSObergeschoss/HK3/status
                  payload: "OFF"
    - topic: stat/HSObergeschoss/HK4/temperature
      then:
        - if:
            condition:
              lambda: 'return (esphome::parse_number<float>(x)) < (id(TargetHK4).state);'
            then:
              - logger.log: "Turn on vent 4!"
              - switch.turn_on: vent4
              - mqtt.publish:
                  topic: stat/HSObergeschoss/HK4/status
                  payload: "ON"
            else:
              - logger.log: "Turn off vent 4!"
              - switch.turn_off: vent4
              - mqtt.publish:
                  topic: stat/HSObergeschoss/HK4/status
                  payload: "OFF"

    
sensor:
  # Current Temperatures
  - platform: mqtt_subscribe
    name: "Current HK1"
    id: CurrentHK1
    topic: stat/HSObergeschoss/HK1/temperature
  - platform: mqtt_subscribe
    name: "Current HK2"
    id: CurrentHK2
    topic: stat/HSObergeschoss/HK2/temperature
  - platform: mqtt_subscribe
    name: "Current HK3"
    id: CurrentHK3
    topic: stat/HSObergeschoss/HK3/temperature
  - platform: mqtt_subscribe
    name: "Current HK4"
    id: CurrentHK4
    topic: stat/HSObergeschoss/HK4/temperature
    
  # Target Temperatures
  - platform: mqtt_subscribe
    name: "Target HK1"
    id: TargetHK1
    topic: stat/HSObergeschoss/HK1/target_temperature
  - platform: mqtt_subscribe
    name: "Target HK2"
    id: TargetHK2
    topic: stat/HSObergeschoss/HK2/target_temperature
  - platform: mqtt_subscribe
    name: "Target HK3"
    id: TargetHK3
    topic: stat/HSObergeschoss/HK3/target_temperature
  - platform: mqtt_subscribe
    name: "Target HK4"
    id: TargetHK4
    topic: stat/HSObergeschoss/HK4/target_temperature



  - platform: wifi_signal
    name: "WiFi Signal Sensor"
    update_interval: 60s
  - platform: uptime
    name: Uptime Sensor
    
    
web_server:
  port: 80
  auth:
    username: nils
    password: inginf95
  
    
captive_portal: