esphome:
  name: garage
  platform: ESP8266
  board: esp01_1m
  on_boot:
    then:
      - if:
          condition:
            and:
              - binary_sensor.is_on:  SensorUnten
              - binary_sensor.is_off: SensorOben
          then:
            - lambda: |-
                id(GarageStatus) = 2;
      - if:
          condition:
            and:
              - binary_sensor.is_off: SensorUnten
              - binary_sensor.is_on:  SensorOben
          then:
            - lambda: |-
                id(GarageStatus) = 0;
      - if:
          condition:
            and:
              - binary_sensor.is_off: SensorUnten
              - binary_sensor.is_off: SensorOben
          then:
            - lambda: |-
                id(GarageStatus) = 1;
                
# Enable logging
logger:

# Enable Home Assistant API
#api:

ota:
  password: "6e5ed3fb02234218269a67f7fb3dc2fb"

wifi:
  ssid: "EasyBox-368239"
  password: "inginf95"

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Garage Fallback Hotspot"
    password: "inginf95"

captive_portal:

web_server:
  port: 80
  auth:
    username: nils
    password: inginf95

globals:
  - id: GarageStatus
    type: int
    restore_value: no
    initial_value: '0'
    #0 = open
    #1 = in transit
    #2 = closed, assume the garage is closed
    
mqtt:
  broker: 192.168.178.36
  port: 1884
  username: nils
  password: inginf95

switch:
  - platform: gpio
    name: "Relay"
    id: pushbutton
    pin: 14
    inverted: true
    on_turn_on:
    - delay: 500ms
    - switch.turn_off: pushbutton

text_sensor:
  - platform: mqtt_subscribe
    name: "Garage Command"
    id: command
    topic: cmnd/Badezimmer/MQTTGateway/Garage/target
    on_value:
      - if:
          condition:
            text_sensor.state:
              id: command
              state: 'OPEN'
          then:
            - mqtt.publish:
                topic: stat/Garage/status
                payload: "Garage soll geöffnet werden"
            - if:
                condition:
                  lambda: 'return (id(GarageStatus)==2);'
                then:
                  - switch.turn_on: pushbutton
      - if:
          condition:
            text_sensor.state:
              id: command
              state: 'CLOSE'
          then:
            - mqtt.publish:
                topic: stat/Garage/status
                payload: "Garage soll geschlossen werden"
            - if:
                condition:
                  lambda: 'return (id(GarageStatus)==0);'
                then:
                  - switch.turn_on: pushbutton
    



binary_sensor:
  - platform: gpio
    pin:
      number: 5
    name: SensorOben
    id: SensorOben
    on_state:
      if:
        condition:
          binary_sensor.is_on: SensorOben
        then:
          if:
            condition:
              binary_sensor.is_off: SensorUnten
            then:
              - mqtt.publish:
                  topic: stat/Garage/status
                  payload: "Garage ist offen"
              - mqtt.publish:
                  topic: stat/Badezimmer/MQTTGateway/Garage/status
                  payload: "OPENED"
              - lambda: |-
                  id(GarageStatus) = 0;
        else: #is off
          if:
            condition:
              binary_sensor.is_on: SensorUnten
            then:
              - mqtt.publish:
                  topic: stat/Garage/status
                  payload: "Garage ist geschlossen"
              - mqtt.publish:
                  topic: stat/Badezimmer/MQTTGateway/Garage/status
                  payload: "CLOSED"
              - lambda: |-
                  id(GarageStatus) = 2;
            else:
              - mqtt.publish:
                  topic: stat/Garage/status
                  payload: "Garage ist in Transit"
              - mqtt.publish:
                  topic: stat/Badezimmer/MQTTGateway/Garage/status
                  payload: "IN TRANSIT"
              - lambda: |-
                  id(GarageStatus) = 1;
  - platform: gpio
    pin:
      number: 4
    name: SensorUnten
    id: SensorUnten
    on_state:
      if:
        condition:
          binary_sensor.is_on: SensorUnten
        then:
          if:
            condition:
              binary_sensor.is_off: SensorOben
            then:
              - mqtt.publish:
                  topic: stat/Garage/status
                  payload: "Garage ist geschlossen"
              - mqtt.publish:
                  topic: stat/Badezimmer/MQTTGateway/Garage/status
                  payload: "CLOSED"
              - lambda: |-
                  id(GarageStatus) = 2;
        else: #is off
          if:
            condition:
              binary_sensor.is_on: SensorOben
            then:
              - mqtt.publish:
                  topic: stat/Garage/status
                  payload: "Garage ist offen"
              - mqtt.publish:
                  topic: stat/Badezimmer/MQTTGateway/Garage/status
                  payload: "OPENED"
              - lambda: |-
                  id(GarageStatus) = 0;
            else:
              - mqtt.publish:
                  topic: stat/Garage/status
                  payload: "Garage ist in Transit"
              - mqtt.publish:
                  topic: stat/Badezimmer/MQTTGateway/Garage/status
                  payload: "IN TRANSIT"
              - lambda: |-
                  id(GarageStatus) = 1;
    
sensor:  
  - platform: wifi_signal
    name: "WiFi Signal Sensor"
    update_interval: 60s
  - platform: uptime
    name: Uptime Sensor