added HS oben/unten

hs-test.yaml

@@ -7,7 +7,7 @@ esphome:
 logger:
 
 # Enable Home Assistant API
-api:
+#api:
 
 ota:
   password: "dd9d2a5e573d1d0ed1435d5c176b580c"

hs_oben.yaml

@@ -0,0 +1,177 @@
+esphome:
+  name: hs_oben
+  platform: ESP32
+  board: esp32dev
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+#api:
+
+ota:
+  password: "dd9d2a5e573d1d0ed1435d5c176b580c"
+
+wifi:
+  ssid: "EasyBox-368239"
+  password: "inginf95"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "HS-Obergeschoss Fallback Hotspot"
+    password: "inginf95"
+
+switch:
+  - platform: gpio
+    name: "Ventil 1"
+    id: vent1
+    pin: GPIO32
+    inverted: true
+  - platform: gpio
+    name: "Ventil 2"
+    id: vent2
+    pin: GPIO33
+    inverted: true
+  - platform: gpio
+    name: "Ventil 3"
+    id: vent3
+    pin: GPIO25
+    inverted: true
+  - platform: gpio
+    name: "Ventil 4"
+    id: vent4
+    pin: GPIO26
+    inverted: true
+
+
+mqtt:
+  broker: 192.168.178.76
+  port: 1884
+  username: nils
+  password: inginf95
+  # Reaction to target temperature
+  on_message:
+    - topic: stat/HSObergeschoss/HK1/temperature
+      then:
+        - if:
+            condition:
+              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK1).state);'
+            then:
+              - logger.log: "Turn on vent 1!"
+              - switch.turn_on: vent1
+              - mqtt.publish:
+                  topic: stat/HSObergeschoss/HK1/status
+                  payload: "ON"
+            else:
+              - logger.log: "Turn off vent 1!"
+              - switch.turn_off: vent1
+              - mqtt.publish:
+                  topic: stat/HSObergeschoss/HK1/status
+                  payload: "OFF"
+    - topic: stat/HSObergeschoss/HK2/temperature
+      then:
+        - if:
+            condition:
+              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK2).state);'
+            then:
+              - logger.log: "Turn on vent 2!"
+              - switch.turn_on: vent2
+              - mqtt.publish:
+                  topic: stat/HSObergeschoss/HK2/status
+                  payload: "ON"
+            else:
+              - logger.log: "Turn off vent 2!"
+              - switch.turn_off: vent2    
+              - mqtt.publish:
+                  topic: stat/HSObergeschoss/HK2/status
+                  payload: "OFF"
+    - topic: stat/HSObergeschoss/HK3/temperature
+      then:
+        - if:
+            condition:
+              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK3).state);'
+            then:
+              - logger.log: "Turn on vent 3!"
+              - switch.turn_on: vent3
+              - mqtt.publish:
+                  topic: stat/HSObergeschoss/HK3/status
+                  payload: "ON"
+            else:
+              - logger.log: "Turn off vent 3!"
+              - switch.turn_off: vent3
+              - mqtt.publish:
+                  topic: stat/HSObergeschoss/HK3/status
+                  payload: "OFF"
+    - topic: stat/HSObergeschoss/HK4/temperature
+      then:
+        - if:
+            condition:
+              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK4).state);'
+            then:
+              - logger.log: "Turn on vent 4!"
+              - switch.turn_on: vent4
+              - mqtt.publish:
+                  topic: stat/HSObergeschoss/HK4/status
+                  payload: "ON"
+            else:
+              - logger.log: "Turn off vent 4!"
+              - switch.turn_off: vent4
+              - mqtt.publish:
+                  topic: stat/HSObergeschoss/HK4/status
+                  payload: "OFF"
+
+    
+sensor:
+  # Current Temperatures
+  - platform: mqtt_subscribe
+    name: "Current HK1"
+    id: CurrentHK1
+    topic: stat/HSObergeschoss/HK1/temperature
+  - platform: mqtt_subscribe
+    name: "Current HK2"
+    id: CurrentHK2
+    topic: stat/HSObergeschoss/HK2/temperature
+  - platform: mqtt_subscribe
+    name: "Current HK3"
+    id: CurrentHK3
+    topic: stat/HSObergeschoss/HK3/temperature
+  - platform: mqtt_subscribe
+    name: "Current HK4"
+    id: CurrentHK4
+    topic: stat/HSObergeschoss/HK4/temperature
+    
+  # Target Temperatures
+  - platform: mqtt_subscribe
+    name: "Target HK1"
+    id: TargetHK1
+    topic: stat/HSObergeschoss/HK1/target_temperature
+  - platform: mqtt_subscribe
+    name: "Target HK2"
+    id: TargetHK2
+    topic: stat/HSObergeschoss/HK2/target_temperature
+  - platform: mqtt_subscribe
+    name: "Target HK3"
+    id: TargetHK3
+    topic: stat/HSObergeschoss/HK3/target_temperature
+  - platform: mqtt_subscribe
+    name: "Target HK4"
+    id: TargetHK4
+    topic: stat/HSObergeschoss/HK4/target_temperature
+
+
+
+  - platform: wifi_signal
+    name: "WiFi Signal Sensor"
+    update_interval: 60s
+  - platform: uptime
+    name: Uptime Sensor
+    
+    
+web_server:
+  port: 80
+  auth:
+    username: nils
+    password: inginf95
+  
+    
+captive_portal:

hs_unten.yaml

@@ -0,0 +1,178 @@
+esphome:
+  name: hs_unten
+  platform: ESP32
+  board: esp32dev
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+#api:
+
+ota:
+  password: "dd9d2a5e573d1d0ed1435d5c176b580c"
+
+wifi:
+  ssid: "EasyBox-368239_WZ"
+  password: "inginf95"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "HS-Erdgeschoss Fallback Hotspot"
+    password: "inginf95"
+ 
+ 
+switch:
+  - platform: gpio
+    name: "Ventil 1"
+    id: vent1
+    pin: GPIO32
+    inverted: true
+  - platform: gpio
+    name: "Ventil 2"
+    id: vent2
+    pin: GPIO33
+    inverted: true
+  - platform: gpio
+    name: "Ventil 3"
+    id: vent3
+    pin: GPIO25
+    inverted: true
+  - platform: gpio
+    name: "Ventil 4"
+    id: vent4
+    pin: GPIO26
+    inverted: true
+
+
+mqtt:
+  broker: 192.168.178.76
+  port: 1884
+  username: nils
+  password: inginf95
+  # Reaction to target temperature
+  on_message:
+    - topic: stat/HSErdgeschoss/HK1/temperature
+      then:
+        - if:
+            condition:
+              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK1).state);'
+            then:
+              - logger.log: "Turn on vent 1!"
+              - switch.turn_on: vent1
+              - mqtt.publish:
+                  topic: stat/HSErdgeschoss/HK1/status
+                  payload: "ON"
+            else:
+              - logger.log: "Turn off vent 1!"
+              - switch.turn_off: vent1
+              - mqtt.publish:
+                  topic: stat/HSErdgeschoss/HK1/status
+                  payload: "OFF"
+    - topic: stat/HSErdgeschoss/HK2/temperature
+      then:
+        - if:
+            condition:
+              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK2).state);'
+            then:
+              - logger.log: "Turn on vent 2!"
+              - switch.turn_on: vent2
+              - mqtt.publish:
+                  topic: stat/HSErdgeschoss/HK2/status
+                  payload: "ON"
+            else:
+              - logger.log: "Turn off vent 2!"
+              - switch.turn_off: vent2    
+              - mqtt.publish:
+                  topic: stat/HSErdgeschoss/HK2/status
+                  payload: "OFF"
+    - topic: stat/HSErdgeschoss/HK3/temperature
+      then:
+        - if:
+            condition:
+              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK3).state);'
+            then:
+              - logger.log: "Turn on vent 3!"
+              - switch.turn_on: vent3
+              - mqtt.publish:
+                  topic: stat/HSErdgeschoss/HK3/status
+                  payload: "ON"
+            else:
+              - logger.log: "Turn off vent 3!"
+              - switch.turn_off: vent3
+              - mqtt.publish:
+                  topic: stat/HSErdgeschoss/HK3/status
+                  payload: "OFF"
+    - topic: stat/HSErdgeschoss/HK4/temperature
+      then:
+        - if:
+            condition:
+              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK4).state);'
+            then:
+              - logger.log: "Turn on vent 4!"
+              - switch.turn_on: vent4
+              - mqtt.publish:
+                  topic: stat/HSErdgeschoss/HK4/status
+                  payload: "ON"
+            else:
+              - logger.log: "Turn off vent 4!"
+              - switch.turn_off: vent4
+              - mqtt.publish:
+                  topic: stat/HSErdgeschoss/HK4/status
+                  payload: "OFF"
+
+    
+sensor:
+  # Current Temperatures
+  - platform: mqtt_subscribe
+    name: "Current HK1"
+    id: CurrentHK1
+    topic: stat/HSErdgeschoss/HK1/temperature
+  - platform: mqtt_subscribe
+    name: "Current HK2"
+    id: CurrentHK2
+    topic: stat/HSErdgeschoss/HK2/temperature
+  - platform: mqtt_subscribe
+    name: "Current HK3"
+    id: CurrentHK3
+    topic: stat/HSErdgeschoss/HK3/temperature
+  - platform: mqtt_subscribe
+    name: "Current HK4"
+    id: CurrentHK4
+    topic: stat/HSErdgeschoss/HK4/temperature
+    
+  # Target Temperatures
+  - platform: mqtt_subscribe
+    name: "Target HK1"
+    id: TargetHK1
+    topic: stat/HSErdgeschoss/HK1/target_temperature
+  - platform: mqtt_subscribe
+    name: "Target HK2"
+    id: TargetHK2
+    topic: stat/HSErdgeschoss/HK2/target_temperature
+  - platform: mqtt_subscribe
+    name: "Target HK3"
+    id: TargetHK3
+    topic: stat/HSErdgeschoss/HK3/target_temperature
+  - platform: mqtt_subscribe
+    name: "Target HK4"
+    id: TargetHK4
+    topic: stat/HSErdgeschoss/HK4/target_temperature
+
+
+
+  - platform: wifi_signal
+    name: "WiFi Signal Sensor"
+    update_interval: 60s
+  - platform: uptime
+    name: Uptime Sensor
+    
+    
+web_server:
+  port: 80
+  auth:
+    username: nils
+    password: inginf95
+  
+    
+captive_portal: