Backup of latest home assistant scripts

esp8266-test.yaml

@@ -0,0 +1,24 @@
+esphome:
+  name: esp8266-test
+  platform: ESP8266
+  board: esp01_1m
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+  password: "48f8d0884bc08dc53e56c299a9783401"
+
+wifi:
+  ssid: "EasyBox-368239"
+  password: "inginf95"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Esp8266-Test Fallback Hotspot"
+    password: "HFW1pCVNECIu"
+
+captive_portal:

esphome-heatingsystem.yaml

@@ -0,0 +1,120 @@
+esphome:
+  name: esphome-heatingsystem
+  platform: ESP8266
+  board: esp01_1m
+  board_flash_mode: dout
+  on_boot:
+  - switch.turn_on: relay  
+  - light.turn_on: led
+  - switch.turn_on: fakebutton
+      
+mqtt:
+  broker: 192.168.178.36
+  port: 1884
+  username: nils
+  password: inginf95
+  on_message:
+    topic: esphome-heatingsystem/restart
+    qos: 0
+    then:
+      - switch.turn_off: relay
+  
+# Enable logging
+logger:
+  hardware_uart: UART1
+  
+# Enable Home Assistant API
+#api:
+
+web_server:
+  port: 80
+  auth:
+    username: nils
+    password: inginf95
+    
+ota:
+  password: "0848c056d780accd7fbb0dbaf989156b"
+
+wifi:
+  ssid: "EasyBox-368239"
+  password: "inginf95"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Sonoff-Basic-Test"
+    password: "Wky9j6BNCgI0"
+
+captive_portal:
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO0
+      mode: INPUT_PULLUP
+      inverted: True
+    name: "Sonoff Basic Button"
+    on_press:
+      - switch.toggle: fakebutton
+
+switch:
+  - platform: template
+    name: "Sonoff Basic Relay"
+    optimistic: true
+    id: fakebutton
+    turn_on_action:
+    - switch.turn_on: relay
+    - light.turn_on: led
+    turn_off_action:
+    - switch.turn_off: relay
+    - light.turn_off: led
+  - platform: gpio
+    id: relay
+    pin: GPIO12
+    name: "Heating System Relay"
+    on_turn_off:
+    - delay: 2500ms
+    - switch.turn_on: relay
+    
+output:
+  - platform: esp8266_pwm
+    id: basic_green_led
+    pin:
+      number: GPIO13
+      inverted: True
+
+light:
+  - platform: monochromatic
+    name: "Sonoff Basic Green LED"
+    output: basic_green_led
+    id: led
+
+sensor:
+  - platform: wifi_signal
+    name: "Sonoff Basic WiFi Signal"
+    update_interval: 60s
+  - platform: uptime
+    name: "Sonoff Basic Uptime"
+  - platform: dallas
+    address: 0x4F01204FEB52A128
+    name: "Test Sensor Temperature"
+    filters:
+      - filter_out: nan
+  - platform: dallas
+    address: 0x1901204FFD99B328
+    name: "Test Sensor2 Temperature"
+    filters:
+      - filter_out: nan
+  - platform: dallas
+    address: 0x9001204EFDB37828
+    name: "Test Sensor3 Temperature"
+    filters:
+      - filter_out: nan
+
+dallas:
+  - pin: GPIO1
+    update_interval: 30s
+
+text_sensor:
+  - platform: version
+    name: "Sonoff Basic ESPHome Version"
+    

esphome-test.yaml

@@ -40,7 +40,7 @@ switch:
 
 sensor:
   - platform: mqtt_subscribe
-    name: "Temperatur B<EFBFBD>ro"
+    name: "Temperatur Büro"
     id: DachTemperatur
     topic: stat/Dach/MA/temperature
   - platform: wifi_signal

garage.yaml

@@ -65,7 +65,7 @@ globals:
     #2 = closed, assume the garage is closed
     
 mqtt:
-  broker: 192.168.178.76
+  broker: 192.168.178.36
   port: 1884
   username: nils
   password: inginf95
@@ -94,7 +94,7 @@ text_sensor:
           then:
             - mqtt.publish:
                 topic: stat/Garage/status
-                payload: "Garage soll ge<EFBFBD>ffnet werden"
+                payload: "Garage soll geöffnet werden"
             - if:
                 condition:
                   lambda: 'return (id(GarageStatus)==2);'

hs_oben.yaml

@@ -45,7 +45,7 @@ switch:
 
 
 mqtt:
-  broker: 192.168.178.76
+  broker: 192.168.178.36
   port: 1884
   username: nils
   password: inginf95
@@ -55,7 +55,7 @@ mqtt:
       then:
         - if:
             condition:
-              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK1).state);'
+              lambda: 'return (esphome::parse_number<float>(x)) < (id(TargetHK1).state);'
             then:
               - logger.log: "Turn on vent 1!"
               - switch.turn_on: vent1
@@ -72,7 +72,7 @@ mqtt:
       then:
         - if:
             condition:
-              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK2).state);'
+              lambda: 'return (esphome::parse_number<float>(x)) < (id(TargetHK2).state);'
             then:
               - logger.log: "Turn on vent 2!"
               - switch.turn_on: vent2
@@ -89,7 +89,7 @@ mqtt:
       then:
         - if:
             condition:
-              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK3).state);'
+              lambda: 'return (esphome::parse_number<float>(x)) < (id(TargetHK3).state);'
             then:
               - logger.log: "Turn on vent 3!"
               - switch.turn_on: vent3
@@ -106,7 +106,7 @@ mqtt:
       then:
         - if:
             condition:
-              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK4).state);'
+              lambda: 'return (esphome::parse_number<float>(x)) < (id(TargetHK4).state);'
             then:
               - logger.log: "Turn on vent 4!"
               - switch.turn_on: vent4

hs_unten.yaml

@@ -45,7 +45,7 @@ switch:
 
 
 mqtt:
-  broker: 192.168.178.76
+  broker: 192.168.178.36
   port: 1884
   username: nils
   password: inginf95
@@ -55,7 +55,7 @@ mqtt:
       then:
         - if:
             condition:
-              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK1).state);'
+              lambda: 'return (esphome::parse_number<float>(x)) < (id(TargetHK1).state);'
             then:
               - logger.log: "Turn on vent 1!"
               - switch.turn_on: vent1
@@ -72,7 +72,7 @@ mqtt:
       then:
         - if:
             condition:
-              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK2).state);'
+              lambda: 'return (esphome::parse_number<float>(x)) < (id(TargetHK2).state);'
             then:
               - logger.log: "Turn on vent 2!"
               - switch.turn_on: vent2
@@ -89,7 +89,7 @@ mqtt:
       then:
         - if:
             condition:
-              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK3).state);'
+              lambda: 'return (esphome::parse_number<float>(x)) < (id(TargetHK3).state);'
             then:
               - logger.log: "Turn on vent 3!"
               - switch.turn_on: vent3
@@ -106,7 +106,7 @@ mqtt:
       then:
         - if:
             condition:
-              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK4).state);'
+              lambda: 'return (esphome::parse_number<float>(x)) < (id(TargetHK4).state);'
             then:
               - logger.log: "Turn on vent 4!"
               - switch.turn_on: vent4

sonoff-3x-wohnzimmer.yaml

@@ -0,0 +1,125 @@
+esphome:
+  name: sonoff-3x-wohnzimmer
+  platform: ESP8266
+  board: esp01_1m
+  board_flash_mode: dout
+
+mqtt:
+  broker: 192.168.178.36
+  port: 1884
+  username: nils
+  password: inginf95
+  on_message:
+    - topic: sonoff-3x-wohnzimmer/relay1
+      payload: "on"
+      then:
+        - switch.turn_on: relay
+    - topic: sonoff-3x-wohnzimmer/relay1
+      payload: "off"
+      then:
+        - switch.turn_off: relay
+    - topic: sonoff-3x-wohnzimmer/relay2
+      payload: "on"
+      then:
+        - switch.turn_on: relay2
+    - topic: sonoff-3x-wohnzimmer/relay2
+      payload: "off"
+      then:
+        - switch.turn_off: relay2
+    - topic: sonoff-3x-wohnzimmer/relay3
+      payload: "on"
+      then:
+        - switch.turn_on: relay3
+    - topic: sonoff-3x-wohnzimmer/relay3
+      payload: "off"
+      then:
+        - switch.turn_off: relay3
+        
+# Disable logging
+logger:
+  baud_rate: 0
+  
+# Enable Home Assistant API
+#api:
+
+web_server:
+  port: 80
+  auth:
+    username: nils
+    password: inginf95
+
+ota:
+  password: "0848c056d780accd7fbb0dbaf989156b"
+
+wifi:
+  ssid: "EasyBox-368239_WZ"
+  password: "inginf95"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Sonoff-3x-Wohnzimmer"
+    password: "Wky9j6BNCgI0"
+
+captive_portal:
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO0
+      mode: INPUT_PULLUP
+      inverted: True
+    name: "Sonoff Basic Button"
+    on_press:
+      - switch.toggle: fakebutton
+
+switch:
+  - platform: template
+    name: "Sonoff Basic Relay"
+    optimistic: true
+    id: fakebutton
+    turn_on_action:
+    - switch.turn_on: relay
+    - light.turn_on: led
+    turn_off_action:
+    - switch.turn_off: relay
+    - light.turn_off: led
+  - platform: gpio
+    name: "Relay1"
+    id: relay
+    pin: GPIO12
+  - platform: gpio
+    name: "Relay2"
+    id: relay2
+    pin: 
+      number: GPIO1
+  - platform: gpio
+    id: relay3
+    name: "Relay3"
+    pin: 
+      number: GPIO3
+    
+
+output:
+  - platform: esp8266_pwm
+    id: basic_green_led
+    pin:
+      number: GPIO13
+      inverted: True
+
+light:
+  - platform: monochromatic
+    name: "Sonoff Basic Green LED"
+    output: basic_green_led
+    id: led
+
+sensor:
+  - platform: wifi_signal
+    name: "Sonoff Basic WiFi Signal"
+    update_interval: 60s
+  - platform: uptime
+    name: "Sonoff Basic Uptime"
+  
+    
+text_sensor:
+  - platform: version
+    name: "Sonoff Basic ESPHome Version"

sonoff-arduino-bridge.yaml

@@ -0,0 +1,127 @@
+esphome:
+  name: sonoff-arduino-bridge
+  platform: ESP8266
+  board: esp01_1m
+  board_flash_mode: dout
+  includes:
+    - uart_read_line_sensor.h
+    
+mqtt:
+  broker: 192.168.178.36
+  port: 1884
+  username: nils
+  password: inginf95
+  on_message:
+    - topic: sonoff-arduino-bridge/cmnd
+      qos: 0
+      then:
+        - uart.write: !lambda |-
+            std::vector<unsigned char> data(x.begin(), x.end());
+            return data;
+    - topic: sonoff-arduino-bridge/pc-on
+      qos: 0
+      then:
+        - uart.write: "OPTO1=ON\r"
+        - delay: 2s
+        - uart.write: "OPTO1=OFF\r"
+    - topic: sonoff-arduino-bridge/pc-off
+      qos: 0
+      then:
+        - uart.write: "OPTO1=ON\n"
+        - delay: 5s
+        - uart.write: "OPTO1=OFF\n"
+  
+# Enable logging
+logger:
+  baud_rate: 0
+  
+# Enable Home Assistant API
+#api:
+
+web_server:
+  port: 80
+  auth:
+    username: nils
+    password: inginf95
+
+uart:
+  tx_pin: GPIO01
+  rx_pin: GPIO03
+  baud_rate: 9600
+  id: uart_bus
+  
+ota:
+  password: "0848c056d780accd7fbb0dbaf989156b"
+
+wifi:
+  ssid: "EasyBox-368239"
+  password: "inginf95"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Sonoff-Basic-Test"
+    password: "Wky9j6BNCgI0"
+
+captive_portal:
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO0
+      mode: INPUT_PULLUP
+      inverted: True
+    name: "Sonoff Basic Button"
+    on_press:
+      - switch.toggle: fakebutton
+
+switch:
+  - platform: template
+    name: "Sonoff Basic Relay"
+    optimistic: true
+    id: fakebutton
+    turn_on_action:
+    - switch.turn_on: relay
+    - light.turn_on: led
+    turn_off_action:
+    - switch.turn_off: relay
+    - light.turn_off: led
+  - platform: gpio
+    id: relay
+    pin: GPIO12
+
+output:
+  - platform: esp8266_pwm
+    id: basic_green_led
+    pin:
+      number: GPIO13
+      inverted: True
+
+light:
+  - platform: monochromatic
+    name: "Sonoff Basic Green LED"
+    output: basic_green_led
+    id: led
+
+sensor:
+  - platform: wifi_signal
+    name: "Sonoff Basic WiFi Signal"
+    update_interval: 60s
+  - platform: uptime
+    name: "Sonoff Basic Uptime"
+  
+    
+text_sensor:
+  - platform: version
+    name: "Sonoff Basic ESPHome Version"
+  - platform: mqtt_subscribe
+    name: "UART Tx"
+    id: command
+    topic: sonoff-arduino-bridge/cmnd
+  - platform: custom
+    lambda: |-
+        auto my_custom_sensor = new UartReadLineSensor(id(uart_bus));
+        App.register_component(my_custom_sensor);
+        return {my_custom_sensor};
+    text_sensors:
+      id: "uart_readline"
+      name: "UART Rx"