Initial commit of first ESPHome projects.

3d-printer-control.yaml

@@ -0,0 +1,67 @@
+esphome:
+  name: 3d-printer-control
+  platform: ESP32
+  board: esp32cam
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+  password: "a540327cb63deda6aa4ddfedfe42df83"
+
+wifi:
+  ssid: "EasyBox-368239"
+  password: "inginf95"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "3D-Printer-Control"
+    password: "YUnLlGxWjXgs"
+
+
+#currently not used:
+binary_sensor:
+  - platform: gpio
+    pin: 
+      number: GPIO02
+      mode: INPUT_PULLUP
+      inverted: true
+    name: "3D-Printer-Button"    
+    
+captive_portal:
+
+#switches for LED and SWPower
+switch:
+  - platform: gpio
+    name: "3D-Printer-LED"
+    pin: GPIO04
+  - platform: gpio
+    name: "3D-PCPower"
+    pin: GPIO14
+    
+sensor:
+  - platform: wifi_signal
+    name: "3D-Printer-WiFiSignal"
+    update_interval: 60s
+  - platform: uptime
+    name: "3D-Printer-Uptime"
+
+#Camera settings, maybe increase resolution in future   
+esp32_camera:
+  external_clock:
+    pin: GPIO0
+    frequency: 20MHz
+  i2c_pins:
+    sda: GPIO26
+    scl: GPIO27
+  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
+  vsync_pin: GPIO25
+  href_pin: GPIO23
+  pixel_clock_pin: GPIO22
+  power_down_pin: GPIO32
+
+  # Image settings
+  name: "3d-Printer-Camera"

esphome-test.yaml

@@ -0,0 +1,69 @@
+esphome:
+  name: esphome-test
+  platform: ESP32
+  board: esp32dev
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+  password: "43d59971c41accde738ca62238a7f6e9"
+
+wifi:
+  ssid: "EasyBox-368239"
+  password: "inginf95"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Esphome-Test Fallback Hotspot"
+    password: "XGUHn79QsuAb"
+
+mqtt:
+  broker: montana2020
+  port: 1884
+  username: nils
+  password: inginf95
+  
+i2c:
+  sda: 21
+  scl: 22
+  scan: true
+  id: bus_a
+  
+switch:
+  - platform: gpio
+    name: "LED"
+    pin: GPIO2
+
+sensor:
+  - platform: mqtt_subscribe
+    name: "Temperatur B<>ro"
+    id: DachTemperatur
+    topic: stat/Dach/MA/temperature
+  - platform: wifi_signal
+    name: "WiFi Signal Sensor"
+    update_interval: 60s
+  - platform: uptime
+    name: Uptime Sensor
+  - platform: esp32_hall
+    name: "ESP32 Hall Sensor"
+    update_interval: 60s
+  - platform: bmp280
+    temperature:
+      name: "BME280 Temperature"
+      oversampling: 16x
+    pressure:
+      name: "BME280 Pressure"
+    address: 0x76
+    update_interval: 60s
+    
+web_server:
+  port: 80
+  auth:
+    username: nils
+    password: inginf95
+    
+captive_portal:

hs-test.yaml

@@ -0,0 +1,153 @@
+esphome:
+  name: hs-test
+  platform: ESP32
+  board: esp32dev
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+  password: "dd9d2a5e573d1d0ed1435d5c176b580c"
+
+wifi:
+  ssid: "EasyBox-368239"
+  password: "inginf95"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Hs-Test Fallback Hotspot"
+    password: "Innr1HW7mk9e"
+
+switch:
+  - platform: gpio
+    name: "Ventil 1"
+    id: vent1
+    pin: GPIO32
+    inverted: true
+  - platform: gpio
+    name: "Ventil 2"
+    id: vent2
+    pin: GPIO33
+    inverted: true
+  - platform: gpio
+    name: "Ventil 3"
+    id: vent3
+    pin: GPIO25
+    inverted: true
+  - platform: gpio
+    name: "Ventil 4"
+    id: vent4
+    pin: GPIO26
+    inverted: true
+
+
+mqtt:
+  broker: 192.168.178.76
+  port: 1884
+  username: nils
+  password: inginf95
+  # Reaction to target temperature
+  on_message:
+    - topic: stat/HS1/HK1/temperature
+      then:
+        - if:
+            condition:
+              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK1).state);'
+            then:
+              - logger.log: "Turn on vent 1!"
+              - switch.turn_on: vent1
+            else:
+              - logger.log: "Turn off vent 1!"
+              - switch.turn_off: vent1
+    - topic: stat/HS1/HK2/temperature
+      then:
+        - if:
+            condition:
+              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK2).state);'
+            then:
+              - logger.log: "Turn on vent 2!"
+              - switch.turn_on: vent2
+            else:
+              - logger.log: "Turn off vent 2!"
+              - switch.turn_off: vent2    
+    - topic: stat/HS1/HK3/temperature
+      then:
+        - if:
+            condition:
+              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK3).state);'
+            then:
+              - logger.log: "Turn on vent 3!"
+              - switch.turn_on: vent3
+            else:
+              - logger.log: "Turn off vent 3!"
+              - switch.turn_off: vent3
+    - topic: stat/HS1/HK4/temperature
+      then:
+        - if:
+            condition:
+              lambda: 'return (esphome::parse_float(x)) < (id(TargetHK4).state);'
+            then:
+              - logger.log: "Turn on vent 4!"
+              - switch.turn_on: vent4
+            else:
+              - logger.log: "Turn off vent 4!"
+              - switch.turn_off: vent4
+
+    
+sensor:
+  # Current Temperatures
+  - platform: mqtt_subscribe
+    name: "Current HK1"
+    id: CurrentHK1
+    topic: stat/HS1/HK1/temperature
+  - platform: mqtt_subscribe
+    name: "Current HK2"
+    id: CurrentHK2
+    topic: stat/HS1/HK2/temperature
+  - platform: mqtt_subscribe
+    name: "Current HK3"
+    id: CurrentHK3
+    topic: stat/HS1/HK3/temperature
+  - platform: mqtt_subscribe
+    name: "Current HK4"
+    id: CurrentHK4
+    topic: stat/HS1/HK4/temperature
+    
+  # Target Temperatures
+  - platform: mqtt_subscribe
+    name: "Target HK1"
+    id: TargetHK1
+    topic: stat/HS1/HK1/target_temperature
+  - platform: mqtt_subscribe
+    name: "Target HK2"
+    id: TargetHK2
+    topic: stat/HS1/HK2/target_temperature
+  - platform: mqtt_subscribe
+    name: "Target HK3"
+    id: TargetHK3
+    topic: stat/HS1/HK3/target_temperature
+  - platform: mqtt_subscribe
+    name: "Target HK4"
+    id: TargetHK4
+    topic: stat/HS1/HK4/target_temperature
+
+
+
+  - platform: wifi_signal
+    name: "WiFi Signal Sensor"
+    update_interval: 60s
+  - platform: uptime
+    name: Uptime Sensor
+    
+    
+web_server:
+  port: 80
+  auth:
+    username: nils
+    password: inginf95
+  
+    
+captive_portal: